61 | en
Continue in this way for each body area until you have reached the highest
energy level that is still comfortable.
• Do not treat the same area of skin more than once per hair removal
session!
• Avoid overlapping light pulses!
• If your skin blisters or burns, stop using immediately!
• If you use a higher energy level than
1
, avoid being in the sun during use.
Do not expose treated areas of skin to direct sunlight! Sun exposure in this
case refers to unprotected constant exposure to direct sunlight for more
than 15 minutes or unprotected exposure to diffused light for longer than
one hour. Protect the treated skin carefully with sun cream with a sun pro-
tection factor of 30 or above throughout the hair removal process and for
at least 2 weeks following the last hair removal session.
• Always shave the area to be treated if there are protruding hairs or stubble.
Do not use an epilator and do not remove hairs with tweezers.
• The skin must be clean and dry before use.
• Never use flammable liquids such as alcohol (including perfume,
disin fectants or other agents containing alcohol) or acetone to clean the
skin before use.
• Cover any existing tattoos, dark brown or black spots such as large
freckles, moles, birthmarks or warts before use (e.g. with a white cloth or
adhesive medical tape).
• Do not use the device on or near nipples or genitals (male or female).
• Do not use the device on any part of the body where you might later wish
to have hair.
