11
English
1. Individual response depends on hair type as well as biological factors that may affect hair growth patterns. Some users may respond quicker or slower
than the average number of treatments.
2. One cannot expect permanent epilation in a single or even double treatment sessions. The duration of the resting period for hair follicles also
depends on the body area.
9. How To Use Glide™
9.1. Glide™ Setup
1. Remove the Glide™ hair removal device, and other components from box.
2. Plug the power cord into the Glide™ Device socket.
3. Plug the other end of the power cord into an electrical outlet.
4. All six LED lights will blink on and off, one after the other, in a circle.
Your Glide™ is now ready to start.
9.2. Treating with Glide™ for the first time
1. The skin should be s
haved, clean, dry
and
free
of any powders, antiperspirants or deodorants.
2. Press the central button briefly. The Energy level 1 led will turn on.
About 1 second later, the Ready Indicator Light will turn on. The device is now set to deliver the lowest energy
level pulses. The device is ready for you to trigger the first pulse.
3. If you wish to change the energy level, press the CENTRAL BUTTON quickly and repeatedly to increase the
energy level from 1 to 5 and from 5 directly back to 1, cyclically, until the desired energy level is set. The Energy
Level indicator Lights will indicate the energy level setting. (See “Energy Level” frame).
Energy Level
Energy level determines the intensity of the Glide™ light pulse delivered to your skin, from the lowest
level (1) to the highest level (5). Corresponding indicator lights on the control panel represent the
increases in energy. As energy level increases, so do hair removal results as well as the risk of possible
side effects and complications.
Always start your first Glide™ hair removal session at the lowest energy setting.
If you experience little or no discomfort during and after the hair removal session using the lowest energy
level, raise the energy level by one indicator light at the next session, and so on for each subsequent session.
Do not raise the energy level if you experience abnormal discomfort during or after
treating with Glide™ (See section 7 - “Risks of Using Glide”).
Do not raise the energy level during a hair removal session even if you experience no
discomfort. Discomfort may also appear sometime after the session.
