japa
315+
User manual
Translation
11
315+ 2.0 - 2020
The JAPA 315 firewood machine can be equipped with four different power sources. The following
presents instructions for preparing them.
A.
TRH model
: Connect the + connector to the
pressure line and the - connector to the available
return line. Note the maximum hydraulic output.
B.
TR model
: Connect the power take-off shaft.
Note the highest rpm 400 1/min.
C.
E model
: Electric motor 4kW/400V/16A, connect
only to a fault current protected socket. Note the
motor’s correct rotation direction and the reverser of
the socket.
D.
BE model
: Open the fuel valve and turn the
power switch to the I position. Pull the starter cable.
Read the motor operating instructions for cold
starts.
E. A factory-installed electric starter is
available for the
BE model
as an
accessory. The electric starter package
includes a battery with a mounting rack
and the starter with keys. To start the
firewood processor with the accessory,
open the fuel valve and turn the ignition
key to the START position. Read the
motor operating instructions for cold
starts.
READ THE USER MANUAL BEFORE ACTIVATING THE MACHINE FOR THE FIRST TIME!
2.6 Transport position
The machine can be placed in the transport position by performing the steps in section 2.4 in reverse.
