japa
315+
User manual
Translation
31
315+ 2.0 - 2020
8.
Technical specifications
Cutting ................................................................ Hydraulic chainsaw
Saw bar 13"/1.3 mm
Saw chain ........................................................... 56 VL / 0.325”/1.3 mm
Max cutting diameter .......................................... 310 mm
Max splitting length ............................................. 500 mm
Number of splitting pushers ................................ 1
Built-in hydraulic system ..................................... Yes (TRH = No)
Electric motor/fuse .............................................. 4.0 kW/3 x 16A (E models only)
IP
................................................................. 65
Combustion engine ............................................. 10 kW (BE models only)
Splitting power/cylinder diameter........................ 5.6 t/60 mm
4-way splitting knife ............................................ Standard
6-way splitting knife ............................................ Accessory
Hydraulic oil tank ................................................ 30 litres
Blade lubrication oil tank ..................................... 3 litres
Conveyor/discharge chute length ....................... 3.8 m/2.3 m/(discharge chute) 1.6 m
Out-feed conveyor belt width .............................. 200 mm
In-feed conveyor length/width...............................2.0 m/150 mm
Max lifting height ................................................. 300 cm (45 degrees)
Max weight.......................................................... 730 kg
Max height in working position ........................... 306 cm
Max height in transport position:
2.3 m conveyor ........................................ 268 cm
3.8 m conveyor ........................................ 250 cm
discharge chute ....................................... 160 cm
Max length in working position ........................... 850 cm (log lifter)
Max length in transport position.......................... 400 cm (ROAD models)
Max depth ........................................................... 133 cm (ROAD models)
Max log diameter ................................................ 31 cm
Max log length .................................................... 50 cm
Machine output ................................................... 2–6 m3/hr (run)
8.1 Technical specifications of the combustion engine (BE models)
Motor type ........................................................... Honda GX390
Fuel/tank volume ................................................ BE95/6.5 l
Motor oil/volume ................................................. SAE 10W-40/1.1 l
READ THE MANUAL FOR THE COMBUSTION ENGINE BEFORE USE OR MAINTENANCE!
