japa
315+
User manual
Translation
30
315+ 2.0 - 2020
7.
Product disposal
The product must be disposed of appropriately at the end of its service life.
- Drain the oil in the machine into a container
- Take the oil to a recycling point
- Take the machine frame to a metal recycling point
- Observe national legislation
- More information on recycling can be obtained from the national authorities
The logs collide with the conveyor belt
The belt is crooked
The conveyor angle is too steep (2.4 K)
Adjust the top roller of the conveyor
The conveyor does not move
A log has become wedged in the conveyor
Wrong rotation direction (E models)
The hydraulic hoses of the conveyor are
disconnected/loose
The relief valve leaks
Remove the wedged log
Switch the direction from the socket (2.5 C)
Clean and reconnect the quick couplings
(2.4 L)
Adjust the relief valve (5.4.3)
The cutting and splitting device
functions with the guard open
The safety mechanism is damaged
Check and adjust/replace the faulty safety
mechanism component (3.3 C)
