PRODUCT OVERVIEW
The LIMITLESS LR500 packaging consists of the following parts:
• Headlamp body
• Headband
• Helmet bracket with adhesive strip
• Extension cable with helmet strap
• Cable holder side
• Cable holder back
• Quick guide
BEFORE USE
ADJUST THE HEADBAND
The elastic headband is designed to give a comfortable fit at speed. Adjust the headband by
moving the sliding buckle to fit it onto your head.
MODULAR SYSTEM
In order to move the headlamp body from the headband to the helmet bracket, gently push
the lamp upward relative the head plate with head band. Insert the headlamp body in the new
bracket and gently press it down until you hear a click sound.
MOUNTING THE HELMET BRACKET
The helmet bracket comes with pre mounted adhesive on the back for easy mounting on any
helmet. The adhesive is a polyethylene foam tape developed to not damage or cause any
type of weakness to the plastic in your helmet.
Before mounting the helmet bracket on a helmet, make sure the surface is dry and clean.
Remove the protective paper from the adhesive tape on the helmet bracket. Gently press the
helmet bracket to the helmet.
Depending on helmet type, it might be preferable to use the non-flowligt mode which is
when the blue led on the headlamp is off (Helmet mode – Flow light deactivated), when the
headlamp is used on a helmet.
DURING USE
FLOW LIGHT®
Simply tilting the light up or down enables seamless adaption of the light pattern for different
situations like close-up work or long range work/faster speed.
SWITCH ON YOUR HEADLAMP
On the side of the headlamp body there is a push button which controls all light modes. If
you press the button quick the blue led will be turned on which indicates that the flow light
mode is on. If you press the button a few more seconds the blue led won’t be turned on which
means that the headlamp won’t be in the flow light mode.
To turn OFF the headlamp; press and hold the button for 2 seconds.
MAX
SHORT PRESS
LONG PRESS
OFF
OFF
OFF
OFF
MED
MIN
BLINK
FLOW LIGHT ACTIVATED
FLOW LIGHT DEACTIVATED
TEMP CONTROL
The headlamp temperature will increase during use. The headlamp temperature is mainly
depending on light mode, ambient temperature and the airflow (speed). The LR500 headlamp
is equipped with a temperature control function which prevents the headlamp body from
overheating by reducing the power to the LEDs. This means that the lower the ambient
temperature, the stronger the light output.
Note
: Always make sure that the batteries are disconnected when the headlamp is stored in a
closed compartment such as a bag, pocket or similar.
BATTERY INDICATION
When the headlamp is turned off a small LED is turned on inside the front of the headlamp to
indicate the status of the batteries. The battery status indication LED will be on for 5 seconds
after power off.
• Green light – Battery in good condition (more than ~70% remaining)
• Red – Battery in poor condition (less than ~30% remaining)
LOW BATTERY WARNING
During operation of the headlamp there will be a low battery warning when 10% of the battery
energy remains. This is done by flashing both LEDs for 1 second and repeated again after 5
seconds.
AFTER USE
MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it regularly with a
damp cloth.
Heaband cleaning – wash in washing machine at 40º C.
TECHNICAL SPECIFICATIONS
Weight headlamp (excluding battery): 78g
Weight battery:
See Matrix
Battery type:
See Matrix
Light distance:
See Matrix
Lumen:
See Matrix
Burn time:
See Matrix
Water resistance:
IPX5
Material head lamp body:
PC/ABS and Aluminium
Operative temperature range:
-10º - +55º C
Storage temperature range:
-20 - +35ºC
PROTECT THE ENVIRONMENT.
Headlamp and batteries should be recycled and must not be thrown in the regular trash.
Dispose these items in accordance with applicable local regulations.
WARRANTY
Silva warrants that, for a period of two (2) years, your Silva Product will be substantially free of de-
fects in materials and workmanship under normal use. Silva’s liability under this warranty is limited
to repairing or replacing the product. This limited warranty extends only to the original purchaser.
If the Product proves defective during the Warranty Period please contact the original place
of purchase. Make sure to have your proof of purchase on hand when returning the product.
Returns cannot be processed without the original proof of purchase. This warranty does not
apply if the Product has been altered, not been installed, operated, repaired, or maintained in
accordance with instructions supplied by Silva, or has been subjected to abnormal physical
or electrical stress, misuse, negligence or accident. Neither does the warranty cover normal
wear and tear. Silva is not responsible for any consequences, direct or indirect, or damage
resultant from use of this product. In no event will Silva’s liability exceed the amount paid by
you for the product. Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This War-
ranty is valid and may be processed only in the country of purchase.
For more information please visit www.silva.se
FULL VERSION MANUAL
LIMITLESS LR500
Art. No: 37697
