3
Assemble Hose to Tank:
IMPORTANT: Do not attempt to heat
or alter hose, hose nut, or barb prior
to assembly.
1. Align hose barb tabs, push hose
barb into tank until it stops (See
Figure A).
2. Slide hose nut into place and turn
clockwise to tighten. (See Figure B).
NOTE: Do not use tools to tighten
hose nut.
Assemble Extension, Shut-Off and Nozzle:
1. Install the extension onto the shut-
off assembly and tighten the nut
securely. (See Figure C)
2. Install selected nozzle onto the end
of the extension and tighten
securely. (See Figure D)
Select Using Nozzle Chart Below:
A. Cap Nut
B. Foaming Nozzle
C. Adjustable Cone Nozzle
D. Red High-Volume Fan Nozzle
E. Yellow Low-Volume Fan Nozzle
F. Flat Seal
G. Adapter
H. Extension
ADJUSTABLE CONE USES
FOAMING NOZZLE USES
•
Spot spraying in or around flower
beds, trees, and shrubs.
•
Edging along fences, driveways,
and walkways.
•
Preparing garden beds for planting
of ornamentals and vegetables.
•
Spot spraying in flower beds,
walkways, driveways, and
patios, around trees and
shrubs.
•
Edging along fences,
driveways and walkways.
•
Reduces drift
RED HIGH VOLUME FAN NOZZLE USES
YELLOW LOW VOLUME FAN NOZZLE USES
•
Lawn replacement. Kill lawn and
weeds before planting a new lawn.
•
Preparing large areas for planting
of ornamental and vegetable
gardens.
•
For precision spraying in
confined areas such as gardens
and flower beds.
Assembly
Figure A Figure B
