3
Assemble Extension, Shut-Off, Nozzle and Spray Optimizer:
1.
Install the extension “wand” onto the shut
-
off assembly and tighten the nut securely.
(See Figure A)
2. Install Spray Optimiser for low pressure (low
drift) applications. This will help prevent
weed killer formulas from drifting into
undesired areas. (
Do not over tighten,
actual position will vary.
See Figure B)
3. Install selected nozzle onto the end of the
extension or optimiser (if installed) and
tighten securely (See Figure C)
SELECT USING NOZZLE CHART BELOW:
(Nozzle selections vary by model)
A. Cap Nut
B. Foaming Nozzle
C. Adjustable Cone Nozzle
D. Red High-Volume Fan Nozzle
E. Yellow Low-Volume Fan Nozzle
F. Flat Seal
G. Adapter Elbow
H. Extension
ADJUSTABLE CONE USES
FOAMING NOZZLE USES
•
Spot spraying in or around flower
beds, trees, and shrubs.
•
Edging along fences, driveways, and
walkways.
•
Preparing garden beds for planting
of ornamentals and vegetables.
•
Spot spraying in flower beds,
walkways, driveways, and
patios, around trees and shrubs.
•
Edging along fences, driveways
and walkways.
•
Reduces drift.
RED HIGH VOLUME FAN NOZZLE USES
YELLOW LOW VOLUME FAN NOZZLE USES
•
Lawn replacement. Kill lawn and
weeds before planting a new lawn.
•
Preparing large areas for planting of
ornamental and vegetable gardens.
•
For precision spraying in
confined areas such as gardens
and flower beds.
Assembly
Figure A
Figure B
Figure C
