6
Sprayer Storage:
1. Never store sprayer with pressure in chamber or liquid in any part of sprayer.
2. Sprayer tank should be hung upside down, with the cap removed, to dry completely.
3. Do not store or leave any solution in the tank after use.
4. Store in a dry location out of direct sunlight.
5. Keep the sprayer and all chemicals out of the reach of children.
Tank Maintenance:
1. After each use, rinse the tank with clean water.
2. Check the check valve (See Figure G) and filter basket gasket.
(See Figure H) Make sure they do not show signs of wear and
are operating properly. Replace them as required.
3. Clean any dirt or debris from the filter basket.
4. Periodically check the straps for fraying. Replace them as
required.
Shut-off Maintenance:
Always depressurise sprayer before maintenance by
activating shut-off and spraying contents out.
1. Unscrew the handle from the shut-off assembly.
2. Remove the filter from the shut-off assembly.
3. Clean any debris from inside the handle,
shut-off assembly, or the filter by rinsing with clean
water.
4. Reassemble the components as shown and tighten
all connections securely.
Pressure Chamber Maintenance:
WARNING: Always depressurise sprayer before cleaning or
replacing pressure chamber by activating shut-off and
spraying out all pressure.
1. Remove the tank cap and strainer (See Figure I).
2. Reach into the tank and turn the chamber 1/4 turn
counter clockwise (See Figure J) to unlock the
chamber from the pump then remove chamber
from tank (See Figure K).
3. Rinse out any debris that may have accumulated in
the chamber.
4. Reinstall the chamber into the pump by aligning the
tabs on the chamber with the slots in the pump,
push firmly into pump and turn clockwise until
pump stops.
5. Reinstall the strainer and tank cap (Figure L).
Nozzle Maintenance:
1. If nozzle clogs, remove and disassemble the nozzle assembly.
2. Clean the openings of any obstructions and reassemble.
Installation
Assembly
