background image

 
 
 
 

About your Warranty 

 

Page 3 

 

Silvan Australia Pty. Ltd. builds equipment to a high level of specification using components from 

quality suppliers. The following information is provided to assist you with any repairs required 
within the warranty period. 

 

All warranty repairs on Silvan products are carried out by Silvan dealers. If any 

warranty repairs are required on Silvan products, it is recommended that the product be 
returned to the place of purchase. 

 

It is good practice to keep a record of equipment maintenance both during and after the 

warranty period. 

 
The previous information on warranty coverage explains the extent and limitations of your 

Warranty coverage on Silvan Products. 

 
 

Honda Engine Warranty (If supplied) 

A separate Honda engine manufacturers manual and warranty policy may be supplied if the 
pump has been purchased with an Honda engine attached. 

 

Any engine problem should be reported to your Silvan dealer in the first instance, however, any 
authorised Honda servicing dealer can carry out warranty repairs on the engine provided all the 
details of the purchase and engine are supplied. 

 

 
 

Summary of Contents for APS 101

















Reviews: