background image

 
 
 
 

Safety Information 

 

Page 4 

 
 
 
 
 
 

S

 

The pump is designed and 
manufactured solely for the purpose of 
applying agricultural chemicals to 
crops. Under no circumstances should it 
be used for any other purpose. 

S

 

Before using this pump carefully read 
and ensure you understand the contents 
of this manual and any other manual 
supplied with the pump, sprayer or 
machine that the pump is fitted to. 

S

 

Before operating the pump read all the 
safety warnings which are carried on 
various parts of the machine. 

S

 

Never allow an inadequately trained 
person to attach or operate the pump. 

S

 

Do not operate the pump whilst wearing 
loose clothing, unrestrained long hair, 
jewellery or anything which could 
become entangled in rotating 
components or limit your vision. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

 

S

 

Do not operate the pump at speeds 
greater than 540 PTO rpm. 

S

 

Do not operate the pump without all the 
tractor and sprayer or machine safety 
shields in place. Carefully check that 
PTO and driveline shields are correctly 
installed if used. 

S

 

Disconnect the tractor PTO or power 
supply  before performing any operation 
on the pump. 

S

 

Before use of any chemicals refer to the 
chemical manufacturer’s label and 
safety instructions for safe handling 
procedures and correct method of use. 
Always use the recommended personal 
protective clothing and safety 
equipment. 

S

 

Do not pump flammable liquids or 
gases. 

S

 

Children must be kept clear of the 
pump. 

 

 

      Before operating the sprayer read the following safety instructions.  

Failure to comply with these warnings may result in serious injury or death.

Whilst your pump has been designed and manufactured to incorporate all necessary safety 
features it is essential that any person who operates or works on the machine is aware of the 
safety precautions that should be exercised.  
 

Summary of Contents for APS 101

















Reviews: