background image

 

 

  

 

 

 
 

 

 

Warnings !             

 

 

You need to read carefully and take note of the following warnings before attempting to operate or install this sprayer. 
Failure to comply with these warnings may result in serious injury or death. 

 

Warning !  

This sprayer is designed and manufactured solely for the purpose of applying agricultural chemicals to plants. 
Under no circumstances may it be used for any other purposes. 

Warning !  

Prior to sprayer usage all users and operators must have read and fully understand the contents of this 
operation manual 

Warning ! 

Do not exceed the the vehicle manufacturer’s specified safe load and carrying capacity. 

Warning !  

Exercise extreme care when operating in hilly or uneven terrain to ensure proper stability. Refer also to the 

vehicle manufacturer’s operating and safety instructions 

Warning !  

Refer to the chemical manufacturer’s label for correct use and safe handling instructions of chemicals before 

use 

Warning !  

Never allow inadequately trained personnel to attach or operate the implement 

Warning !  

Before carrying out maintenance work, wash the sprayer thoroughly to remove all toxic chemicals that may 

contaminate the sprayer. 

Warning !  

Do not point spray gun at any part of the human body. 

Warning !  

Do not pump flamable liquids or operate the pump in an explosive environment. 

 

The following “Safety” decal should be fitted to the machine at all times in the location shown in the diagram. If the decal 
is missing or unreadable it should be replaced by ordering a new decal from your Silvan dealer by the part number, DEC 
90.  

 

 

P/No  DEC48 

Safety Information

Summary of Contents for Spotpak 50L









Reviews: