■
10
│
GB
│
IE
│
NI
SNWD 1000 A1
Saving a measurement
You can save all displayed values for a food. The scales will automatically add
the values to each saved measurement. For instance, you can enter every item of
food you eat over the course of a day and view the data at the end of the day.
The saved values are retained, even after you switch off the scales or change the
battery.
You have previously performed a measurement and entered the code.
1) Touch
the
M+
button to save the measured weight along with the nutritional
and energy values. “M” plus the weighing number (e.g. 01) flash in the
display for about 10 seconds after the total symbol Σ.
NOTE
►
You can only save measurements for which you have also entered a
code.
►
If make a mistake when entering the code, you can only change the
code before saving by entering it again. It is not possible to change the
code subsequently.
2) Proceed in the same way to save further nutritional values. The weighing number
is increased by one after each save. The number from the last weighing is
displayed.
NOTE
►
The memory can store up to 99 measurements. After this, no further
measurement can be saved and "M99" flashes in the display .
To be able to save further measurements, delete the saved data by
pressing the
MC
button. The display M99 goes out.
►
Note that pressing the
MC
button will delete all measured values
saved previously.
►
If the total for a saved nutritional or energy value exceeds the maximum
value, the display will show "E- - - -" there. After exiting the memory
function, "M" and the digit from the last process both flash to indicate
that no more measurements can be saved. The following maximum
values apply:
Kilocalories
99999
Fat
9999.9 g
Carbohydrates
9999.9 g
Protein
9999.9 g
Cholesterol
9999.9 mg
Summary of Contents for SNWD 1000 A1
Page 3: ...A B...
Page 39: ...36 GB IE NI SNWD 1000 A1...
