GB
│
IE
│
NI
│
13
■
SNWD 1000 A1
Cleaning and Care
IMPORTANT
Ensure that no fluids can enter the scale!
This could irreparably damage the appliance.
Do not use abrasive or solvent cleaners.
These could damage the surfaces.
■
Wipe the scales using a cloth lightly moistened with mild soapy water and
then wipe dry with a lint-free cloth.
Troubleshooting
In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
WARNING
Observe the following safety information to avoid danger and property damage:
►
Repairs to electronic appliances may only be carried out by specialists
who have been trained by the manufacturer. Considerable danger to the
consumer and damage to the appliance can occur as a result of incorrect
repairs.
The following table will help with localizing and remedying minor malfunctions:
Display Possible
cause
Remedy
The output in the
display becomes
unreadable.
The batteries are very low.
Replace the batteries.
No output in the
display .
The plastic strip in the
battery compartment
has not been removed.
The batteries are
discharged.
Remove the plastic strip from
the battery compartment .
Replace the batteries.
"E- - - -" appears in the
display .
The permitted maximum
weight of 5 kg or 11 lb is
exceeded.
Remove a little weight from the
scale.
NOTICE
►
If you cannot resolve the problem with the above steps, please contact
Customer Support.
Summary of Contents for SNWD 1000 A1
Page 3: ...A B...
Page 39: ...36 GB IE NI SNWD 1000 A1...
