Silver Cross 3D Car Seat, Manual

6

Installing the 3D Car Seat 
ISOFIX Base (continued)

4

  While pressing forward on the 

adjustment buttons (a) connect the 

ISOFIX arms (b) onto the vehicle 

ISOFIX points.

5

  Firmly pull the base towards you, 

making sure that both arms are 

connected and check that the 

ISOFIX connection indicators are 
now showing green. (

parts list 

no.3

)

6

  Push the base towards and up 

against the back of the vehicle 

seat. Make sure that the back of 

the base is now firmly up against 

the rear of the vehicle seat. Check 

again that the ISOFIX connection 

indicators are showing green. The 

base should now be secure and 

stable.

Do not place the front 

support leg on a floor storage 

compartment lid. The front 

support leg MUST make full and firm 

contact with the vehicle floor.

Make sure that the support leg does 

not raise the base from the surface 

of the vehicle seat.

Not all infant carrier bases fit 

all vehicles. For advice as to 

the suitability of this infant 

carrier base please consult the 

vehicle application list before you 

purchase the base and make sure that 

the make, model and year of your 

vehicle/s is suitable.  If you are in any 

doubt please contact Silver Cross 

customer services on 0845  8726900.

a

b

b

4

5

6