Silver Cross 3D Car Seat, Manual

9

Looking after your 3D Car Seat  
ISOFIX Base

Wipe clean using a mild hand soap 
and warm water. You must not use 
detergents, solvents or strong soaps. 
This may weaken the base shell. You 
must not remove, dismantle or alter 
any part of the base. You must not oil 
or lubricate any part of the base.

Please read the following safety notes

The Silver Cross 3D Car Seat is the 

only infant carrier that is compatible 

with the 3D Car Seat ISOFIX Base.

Never use the 3D Car Seat 

ISOFIX Base on a passenger 

seat fitted with a front airbag. It 

is very dangerous and it is illegal.

Final checklist before journey

Check

•  You have NOT fitted the 3D Car 

Seat ISOFIX Base on a passenger 
seat fitted with an airbag. 

•  The 3D Car Seat ISOFIX Base is 

correctly fitted with no excessive 
movement forward or to the side.

•  All indicators are green.

Warranty

All Silver Cross products are guaranteed 
for a period of 12 months against 
faulty  workmanship, when the product 
is used  correctly according to the 
instruction manual.

Notice

1.

  The category of this child restraint  

is “semi-universal” and it is  
suitable for installation in the  
vehicles and in the seat positions  
indicated in the vehicle 
application list inside this  
packaging.

2.

  Other vehicles and seat positions  

may also be suitable for this  
restraint system.

3.

  If in doubt, consult the 

manufacturer or retailer.

4.

  This is an ISOFIX system for  

children. Approved under  
Regulation Number 44,  
Supplement 5, 04 series of  
amendments, for general use  
in vehicles equipped with an  
ISOFIX fastening system.

5.

  It can be fitted in vehicles with  

positions approved as “ISOFIX” 
positions (as listed in the vehicle  
manual), depending on the  
category of child seat and the  
fastening systems.

6.

  The mechanism has been  

designed for an ISOFIX size class  
and weight group of: 0-13kg and  
Class E.

YES

NO