1
TECHNICAL MANUAL
SILVER KING MOBILE FREEZER
MODEL SKFMW34-EL 230V
Thank you for purchasing Silver King food service equipment. Our goal is to provide our customers with the most reliable equipment
in the industry today. Please read this manual and the accompanying warranty information before operating your new Silver King
unit.
UNCRATE AND INSPECT FOR DAMAGE
Upon delivery of your new Silver King unit, uncrate at once to inspect for possible freight damage following the instructions printed on
the exterior of the container. Report any damages to the carrier responsible for transportation and promptly present a written claim
for any evidence of mishandling. Be sure to save all packaging materials if a claim is to be filed.
PRECAUTIONS BEFORE USING THIS PRODUCT
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
•
Children shall not play with this appliance.
•
Use caution when cleaning the condenser, the fins are very sharp.
•
For units with a dual hertz rating, no adjustments are required for normal operation.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard
•
This refrigeration unit is not intended to be used at altitudes higher than 2000 meters.
•
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
•
Use caution when moving, installing, maintaining and using this refrigeration device to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
•
All component parts must be replaced with like components and all servicing must be done by factory authorized service
personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.
•
If the unit has recently been transported on its side (or placed horizontally), then please let unit stand with the casters (or
feet) on the ground for a minimum of 24 hours before plugging it in.
R
EAD AND
F
OLLOW
ALL S
AFETY
I
NSTRUCTIONS:
Safety Overview:
• Read and follow
ALL SAFETY INSTRUCTIONS
in this manual and any warning/caution labels on the unit (decals, labels or
laminated cards).
• Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regulations before
Operating this unit.
