Assembly and Use
1. Setting of hook
2. Put Water
● Install the hook
Put water into water
according to the
bottle, also suction
drawing,hang power
pipe and hanst pipe
wire and vapour
put into bottle too.
tube on the hook.
3. Power connection
4. Thermolator
● After confirmation
adjusted to high
of the voltage insert
temperature
the plug, switch on
●
Adjust the thermolator
power switch and iron
to the position of high
switch.
temperature.
5. Normal use
● When the pointer
of pressure meter
indicate 3.5 bar, LED
indicator will light up.
Then vapour switch
can be pressed for
use.
♣ When you are using , if water bottle without water, motor temperture
become hot, product stop work.Give the water after one hour become
work.Use this product( keep water in bottle).
10
