Product characteristics
♣ This product satisfies relevant technical requirements for customer's safety.
♣ This product is energy saving product improving basic energy consumption
of boiler.
♣ This vapour generator has four major safety devices.
- automatic pressure cutting switch attached
- safety valve that can discharge pressure in the vapour container in case of
excessive pressure generated because of product abnormality
- two automatic temperature controllers preventing (over temperature attached) do
you mean of over heat?
- the fuser installed internally preventing (over temperature) (over heat) beause of
failure of thermolator
♣ There are two specifications of this vapour generator, 120V and 220V.
- Before it is connected to the socket for use, whether rated voltage is consistent
with voltage required by the product must be confirmed.
♣ When electromagnetic valve is started, 2.5 ~ 4.0 BAR vapour bursts out
through the iron. If the water in pressure container is used up, no vapour
is
generated.
♣ This product includes accessories of hook, measuring cup, funnel,
measuring rod etc.
♣ Refer to Page 4 for other product specifications.
Refer to Operation Instructions of the product for precautions and use
method.
♣ When you are using , if water bottle without water, motor temperture
become hot, product stop work.Give the water after one hour become
work.Use this product( keep water in bottle).
Repair or disassembly of the product at will is not permitted!
The agent nearby must be contacted to repair!
5
