background image

SILVER Audio Processor 4Bmini User’s manual 

 

 

Page 4/38 

Audemat-Aztec SA – Audemat-Aztec INC 

web: www.audemat-aztec.com - e-mail: contact@audemat-aztec.com

 

 

 
Power-Cord Protection:

 

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or 
against them, paying particular attention to cords and plugs, convenience receptacles and the point where they exit 
from the appliance. 

 
Cleaning:

 

The appliance should be cleaned only as recommended by the manufacturer. 

 
Non-use Periods:

 

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of  

 

Object and Liquid Entry: 

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 

 
Damage Requiring Service: 

The appliance should be serviced by qualified service personnel when: 

- The power supply cord or the plug has been damaged; or 
- Objects have fallen, or liquid has been spilled into the appliance; or 
- The appliance has been exposed to rain; or 
- The appliance does not appear to operate normally or exhibits a marked change in performance; or 
- The appliance has been dropped, or the enclosure damaged. 

 
Servicing: 

The user should not attempt to service the appliance beyond that is described in the Operating Instructions. 
All other servicing should be referred to qualified service personnel. 

 
CE CONFORMANCE

This device complies with the requirements of the EEC Council 

Directives: 9 /68/EEC (CE Marking); 7 /2 /EEC (Safety – low voltage directive); 
89/ 6/EEC (electromagnetic compatibility). 
Conformity is declared to those standards: EN 0081-1,EN 0082-1. 
 
 

WARNING: 

This equipment generates, uses, and can radiate radio frequency energy. 

If not installed and used in accordance with the instructions in this manual it may cause 
interference to radio communications. It has been tested and found to comply with the  
limits for a Class A computing device (pursuant to subpart J of Part 1 FCCRules), designed to provide 
reasonable protection against such interference when operated in a commercial environment. Operation 
of this equipment in a residential area is likely to cause interference, at which case, the user, at his own 
expense, will be required to take whatever measures may be required to correct the interference. 

 
 
 
CANADA WARNING:  

This digital apparatus does not exceed the Class A limits for radio noise emissions set out in the Radio 
Interference Regulations of the Canadian Department of Communications. 
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables 
aux brouillages radioélectriques édictés par le ministère des Communications du Canada. 

 

Summary of Contents for 4Bmini







































Reviews: