User Manual
SilverBolt Heat Press
OPERATION INSTRUCTIONS
READ BEFORE USE
1. Check the voltage before using it. The correct voltage is 110.
2. Turn off the machine when not in use, and remove the power plug from
socket.
3. Grasp the handle firmly when opening.
4. Keep children away from the machine.
5. Do not touch the heating platen and platen cover after pressing whilst
in operation.
6. Do not attempt to press products that are not intended for normal heat
transfer.
7. Do not set the temperature any higher than 480F as it may cause over heat
and stop working.
8. The heat press carries a ground line by default, please make sure the socket
gets a ground line protector.
2
