8
5. Unpacking and setting up
1. Unpack the appliance from the
packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs
of damage.
5.1 Assembling the appliance for set-up
on the floor
1. Screw the feet
8
to the underside of the
appliance using the screws provided.
Insert 2 screws for each foot.
Note:
The feet
8
are
angled and must be
fitted so that the
appliance slopes
backwards slightly.
.
Warning!
Check that there is
sufficient distance from the wall,
fixtures and other appliances.
When setting up on the floor, the
distance must be at least 0.5 m to
exclude the risk of fire.
The distance to the wall must
always be observed unless you are
using the wall hooks supplied. The
wall should not be flammable.
2. Select a location in compliance with the
safety information (see “4. Safety
instructions” on page 4).
CPE100696 Wärmewelle LB7 Seite 8 Donnerstag, 26. Juni 2014 4:56 16
