SGBR 1500 B3
GB
│
CY
│
7
■
Using the rotisserie
WARNING! RISK OF INJURY!
►
Always use the tongs
3
to insert the hot rotis-
serie
6
into the appliance or to remove it.
■
You can use the two skewer clamps
0
to fix the
food onto the rotisserie
6
. Loosen the restrainer
.
on the skewer clamps
0
, push them so that the
food is fixed firmly in between the clamps and
then screw the restrainer
.
tight again.
■
First push the end of the rotisserie
6
without
the
notch into the drive
(Figure 1):
Fig. 1: Push the rotisserie
6
into the drive
.
■
Then insert the other end of the rotisserie
6
with
the deep groove in the spit fitting
(Figure 2):
Fig. 2: Insert the rotisserie
6
in the spit fitting
.
NOTE
►
Always slide the baking tray
-
into the lower
rail when you use the rotisserie
6
.
This will collect any drips.
■
To remove the hot rotisserie
6
, grip with
the hooks at the end of the tongs
3
into the
recesses on the rotisserie
6
(Figure 3):
Fig. 3: Hooking the tongs
3
onto the rotisserie
6
■
First lift the left-hand side of the rotisserie
6
out
of the spit fitting
and then pull the rotisserie
6
from the drive
.
