GB
│
5
■
KM 250 B1
Before first use
■
Remove all packaging materials from the appli-
ance.
■
Clean the appliance as described in the section
“Cleaning and care”.
■
Ensure that all parts are completely dry before
operating the appliance.
Assembling the appliance
NOTE
►
The appliance will not start until the bowl
and the lid
are correctly attached.
1) Place the motor unit
on a flat surface so
that the sucker feet can attach firmly and the
appliance stands firmly in place.
2) Place the bowl
onto the motor unit
so that the arrow
on the bowl
points
towards the open lock symbol
on the
motor unit
. Then turn the bowl
until the
arrow
points to the closed lock symbol
and the bowl
clicks into place.
If you want to work with the cutting blades
,
assemble the appliance as described in the section
“Cutting blades”.
If you want to work with the food processing at-
tachments, assemble the appliance as described
in the section “Food processing attachments”.
Cutting blades
1) Place the cutting blades
onto the drive
shaft
. The flattened side of the drive shaft
must correctly fit into the take up of the cutting
blades
. Otherwise the cutting blades
cannot be properly attached.
2) Place the lid
onto the bowl
so that the
arrow
on the lid
coincides with the
arrow
and the opened lock symbol
on the bowl
.
3) Turn the lid
until the arrow
on the lid
points to the arrow
and the closed lock
symbol on the bowl
.
4) Place the pusher
into the feed tube
.
5) Insert the plug into a mains power socket.
WARNING! RISK OF INJURY!
►
To avoid personal injury and damage to the appliance, never insert
or place your hands or any foreign objects into the feed tube.
►
Do not change accessories unless the drive is stationary and the
mixer is unplugged from the power supply! The appliance will run on
for a short time after being switched off!
►
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in motion
during operation, the appliance must be switched off and disconnected
from mains power.
Summary of Contents for 280095
Page 3: ......
