■
32
│
GB
│
IE
SSTB 10 A1
Connecting a playback device using a cinch cable
♦
Connect the audio input jacks
R
and
L
on the rear of the device using
an audio cinch cable with the corresponding audio output sockets on the
external audio device. Make sure that the red and white colour markings
correspond.
♦
To switch on the device, press the
button ( or ).
♦
Press the
FUNCTION
button on the device or the
AUX
button on
the remote control repeatedly until
$8;
appears on the display .
♦
Switch on the connected playback device and start playback.
NOTE
►
If both the AUX 1 socket and the AUX 2 socket are connected to
external playback devices, the music will be played back via the AUX 1
socket by default. To use the AUX 2 socket , simply disconnect the
3.5 mm jack cable from the AUX 1 socket .
Pairing the device with a
Bluetooth
®
playback device
To play audio files via
Bluetooth
®
, the device must previously have been
paired with a compatible
Bluetooth
®
playback device.
♦
Press the
button ( or ) to switch the device on.
♦
Press the
FUNCTION
button on the device repeatedly or the button
once to activate the
Bluetooth
®
function.
E/8(
appears on the display
and the flashing icon indicates that the device is ready for pairing.
♦
Set up the
Bluetooth
®
playback device so that it searches for other
Bluetooth
®
devices. A detailed description of how to do this can be
found in the operating instructions for your
Bluetooth
®
playback device.
♦
Select the entry
SSTB 10 A1
from the list of found devices on your
Bluetooth
®
playback device and, if required, enter the code “
0000
”,
to connect the two devices. If the pairing is successful, you will hear a
signal and the icon appears on the display .
Summary of Contents for 281566
