SilverCrest SWDR 500 A1
English - 23
The time can only be set while the device is powered off. If it is powered on,
press the POWER/SLEEP button (8) to power the device off.
If no button is pressed for approx. 7 seconds while changing the setting, the
settings are applied and the unit exits the setting mode. You can keep the
buttons "VOL-" (12) or "VOL+" (4) pressed to accelerate the digits count.
While powered off, press and hold the "SET/STORE" button (9) until the
display (6) reads "US" or "EU". Now press the "VOL-" (12) or "VOL+" (4)
button to select your preferred date format.
Example:
EU DD.MM.YYYY
US MM.DD.YYYY
Press the "SET/STORE" button (9) to confirm your selection.
Please remember that the tuning spacing for the AM band is also changed
with this setting.
Now set the correct time zone as described in the previous chapter and
press the "SET/STORE" button (9) to confirm the setting. The set time format
flashes.
Now you can press the "VOL-" (12) or "VOL+" (4) buttons to set the desired
time format. Upon factory delivery the time format is set to 24 hours. You
have the choice between
12H
and
24H
. Press the "SET/STORE" button (9)
to confirm the setting. The hour digit flashes.
Press the "VOL-" (12) and "VOL +" (4) buttons to set the
hour
. Press the
"SET/STORE" button (9) to confirm the setting. The minutes digit flashes.
Press the "VOL-" (12) and "VOL +" (4) buttons to set the
minute
. Press the
"SET/STORE" button (9) to confirm the setting. The year digit flashes.
Press the "VOL-" (12) or "VOL+" (4) buttons to set the correct
year
. Press the
"SET/STORE" button (9) to confirm the setting. The month digit flashes.