SKGL 2000 A1
■
10
│
GB
│
IE
│
NI
│
CY
Handling and use
This section provides you with important information on handling and using the
appliance.
Before first use
1) Clean all accessories as described in the section "Cleaning and care" to
remove any production residues.
2) Read these operating instructions carefully.
3) Set up the appliance in accordance with the safety instructions.
4) Unlock the appliance by moving the safety catch
to the position
.
5) Open the appliance.
6) Wipe the hotplates
-
with a damp cloth.
7) Close the appliance.
8) Insert the mains cable plug into a properly connected and earthed mains
power socket which supplies the voltage stated in the "Technical data"
section. Allow the appliance to heat up for about 5 minutes to maximum
temperature by making the appropriate settings on the control panel
.
NOTE
►
The first time the appliance heats up, a small amount of smoke and odour
may result from production-related residues. This is normal and is completely
harmless. Ensure sufficient ventilation; for example, by opening a window.
9) After heating, pull the plug from the mains socket and allow the appliance
to cool down completely.
10) Clean the appliance again with a damp cloth.
Summary of Contents for 290943
Page 3: ...A B ...
Page 33: ...SKGL 2000 A1 30 GB IE NI CY ...
Page 63: ...SKGL 2000 A1 60 GR CY ...
Page 93: ...SKGL 2000 A1 90 DE AT CH ...