6
GB
5. Operation
DANGER! - Fire hazard!
~
Never cover the device or place it on
soft objects (e.g. towels). As long as the
device is switched on and/or hot, al-
ways place it on a stable, flat, heat-re-
sistant surface.
DANGER! Risk of injury
through burning!
~
Never touch the hot comb insert with
ceramic coating
|
1
.
NOTE:
Before using it for the first time,
switch the device on for a few minutes and
set it to the highest temperature (180 °C). As
a result of the manufacturing process, you
may notice a slight odour. This is normal and
only occurs during first use. Ensure that the
room is well ventilated.
5.1
Switching on/off and
adjusting temperature
1. Place the device on a heat-resistant sur-
face.
2. Connect the mains plug
|
1
to a properly
installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
3. Press the on/off button
|
4
for ap-
prox. 2 seconds to switch the device
on. The display
|
2
shows
150
.
4. Use the
+
/
–
|
3
buttons to set the desired
temperature between 100 °C and
180 °C in 10 °C steps. LED segments
moving clockwise in the display
|
2
will
indicate that the device is heating up.
NOTE:
LED segments running anticlockwise
indicate that the device is
cooling down
.
Wait until the desired temperature appears
in the display before straightening your hair.
5. In order to avoid changing the tempera-
ture by accidentally pressing the
+
/
-
|
3
buttons, you can lock these but-
tons.
- Press one of the
+
/
-
|
3
buttons for ap-
prox. 2 seconds. The buttons are now
locked. The display
|
2
shows
.
- Press one of the
+
/
-
|
3
buttons again
for approx. 2 seconds. The buttons
are now unlocked. The display
|
2
stops showing
.
6. Press the on/off button
|
4
for ap-
prox. 2 seconds to switch the device
off.
7. Allow the device to cool down on the
heat-resistant surface.
Switching off automatically
If you do not press a button on the switched-
on device for 30 minutes, it will switch off
automatically. Before this happens, the tem-
perature display will flash in the display
|
2
.
Press the on/off button
|
4
for approx.
2
|
seconds to switch the device back on.
__296201_Haar-Glättungskamm_B6.book Seite 6 Montag, 18. Dezember 2017 1:46 13
Summary of Contents for 296201
