SDBS 2400 B2
FR
│
BE
│
61
■
–
Sortez le réservoir à eau
de la base
-
et videz le reste de l'eau
dans un lavabo.
–
Glissez à nouveau le réservoir à eau
dans la base
-
, jusqu'à ce
qu'il s'enclenche de manière audible.
♦
Assurez-vous que l'appareil soit entièrement sec avant de le réutiliser.
Dépannage
Panne
Cause possible
Dépannage
L'appareil ne
fonctionne pas.
Problème d'alimentation élec-
trique.
Vérifiez si la fiche secteur est
correctement enfichée dans la
prise secteur.
L'appareil n'est pas allumé.
Placez l'interrupteur marche/
arrêt
3
en position "1", pour
allumer l'appareil.
L'appareil ne pro-
duit pas de vapeur
ou trop peu.
Il n'y a pas suffisamment d'eau
dans le réservoir à eau
.
Versez de l'eau dans le réservoir
à eau
.
L'appareil n'a pas encore
suffisamment chauffé.
Attendez jusqu'à ce que le
voyant de contrôle de la tempé-
rature s'éteigne.
Le thermostat
se trouve dans
la plage de réglage
-
.
Réglez une température adaptée
au repassage vapeur (plage de
réglage
).
La génération de vapeur n'a pas
été utilisée depuis longtemps ou
est utilisée pour la première fois.
Maintenez le bouton vapeur
plus longtemps. La vapeur a
besoin d'un certain temps avant de
sortir par la semelle de repassage
.
De l'eau goutte
de la semelle de
repassage
.
Si le repassage vapeur est
brièvement interrompu, la vapeur
se condense dans le flexible de
raccordement en refroidissant
.
Ceci entraîne la formation de
gouttes.
C'est tout à fait normal. Tenez le
fer à repasser au-dessus d'une
serviette ou d'un récipient et ap-
puyez sur le bouton vapeur
.
Au bout de quelques secondes,
de la vapeur s'écoule de la
semelle de repassage
à la
place de l'eau. Continuez ensuite
à repasser.
La température réglée est trop
basse pour repasser à la vapeur.
Réglez une température adaptée
au repassage vapeur (plage de
réglage
).
Summary of Contents for 306479
Page 3: ...A B C ...