SilverCrest SWDR 500 B1
English - 59
8. Before you start
You can power the device on either by using the supplied power adapter (B)
or by using 4 optional AA-sized (LR6) batteries. The batteries are not included
in the package.
8.1 External power / battery power operation
When disconnecting the multi-band tuner (A) from the power supply, different
settings (time and alarm time) are lost. To avoid this, insert batteries before
disconnecting the device from the mains. This guarantees that the mentioned
settings are preserved.
Any stored stations are preserved even if there are no batteries inserted when
disconnecting the device from the mains.
8.2 Inserting the batteries
Open the battery compartment cover (19) on the back panel of the device by
sliding it towards the bottom and remove it. Insert the batteries with the correct
polarity (+ and -), as shown in the following figure. The correct polarity is
labelled on the batteries and inside the battery compartment. Re-insert the
cover of the battery compartment (19) and slide it upwards until it locks in
place.