SilverCrest SWDR 500 B1
English - 69
9.10 Setting the AM reception spacing
Due to different radio broadcasting band allocation in different countries it is
necessary to adjust the tuning spacing:
Region Frequency
band Tuning
spacing
Europe
522 kHz - 1,620 kHz
9 kHz
America
520 kHz - 1,710 kHz
10 kHz
The procedure is as follows:
While powered off, press and hold the "SET/STORE" button (9) until the
display (6) reads "US" or "EU". Now press the "VOL-" (12) or "VOL+" (4)
button to select your tuning region. Please remember that the date format is
also changed with this setting.
9.11 Adjusting the volume
Press the "VOL–" (12) and "VOL+" (4) buttons to adjust the volume to the
desired level. You can set it from level "00" (minimum volume) to level "16"
(maximum level). The device will always power on with the volume level that
was set when it was powered off.
9.12 Setting the sensitivity
This feature is only relevant for the FM and SW bands. Slide the
"DX/LOCAL" switch (22) to the “DX” position to use the device in normal
mode.
Slide the "DX/LOCAL" switch (22) to the “LOCAL” position to receive strong
broadcasting station signals only. This is recommended whenever a weaker
local station is receiving interference from a non-local station.