SilverCrest SWDR 500 B1
78 - English
9.27 Storage when not using the product
If you will not be using the device for a long period of time, remove
any inserted batteries.
Store the device in a dry, cool place.
10. Troubleshooting
The device does not switch on.
Check whether the wall plug power adapter is plugged in.
The inserted batteries may be empty, fit new batteries.
Test that the batteries are fitted with the correct polarity. Please note the
diagram in the battery compartment and on the batteries. See also the
chapter “Inserting the batteries”.
Please check if the button lock feature is enabled. If necessary, press and
hold the "LOCK" button (3) for approx. one second to disable the button
lock.
No radio reception, poor radio reception
Pull the telescopic antenna (1) all the way out and make sure it is
orientated correctly.
Tune in the station correctly. If necessary, start a new station search.
Check whether the "DX/LOCAL" switch (22) is in the correct position.
Please also read the chapter "Setting the sensitivity".
The station name is not shown.
This feature is only supported in FM mode.
The tuned-in station does not broadcast any RDS signal or the signal is too
weak. Re-orientate the antenna to optimise reception.
