■
42
│
GB
│
MT
SHTT 2200 B1
Preparation
1) Remove all parts of the appliance and the operating instructions from the carton .
2) Remove all packaging material .
Operation
This appliance is fitted with a contact sensor . This means that the hairdryer only
switches on if you are holding it in your hand and touching the sensor field
3
at the same time .
Heating and blower levels
1) Insert the plug into the mains power socket .
The hairdryer is fitted with two function switches . You can use these to separately
select the strength of the air flow (blower level switch
6
) and the heat level (heat
level switch
7
):
Blower levels
0
hairdryer is switched off
reduced airflow
increased airflow
Heat levels
reduced heat level
medium heat level
high heat level
2) Select the desired blower level using the blower level switch
6
. The control
lamp
5
illuminates and shows that the hairdryer will start as soon as the
sensor field
3
is contacted .
3) Select the desired heating level using the heating level switch
7
.
4) If you are not holding the hairdryer in the hand:
take hold of the hairdryer with your hand on its handle . This means that you
will be touching the sensor field
3
and the hairdryer will switch on .
If you put the hairdryer down for a short time, it will switch off automatically .
IB_316064_SHTT220B1_LB5.indb 42
14.06.19 12:16
Summary of Contents for 316064 1904
Page 3: ...B A 5 7 6 1 8 9 2 4 3 ...
