STGE 2000 A1
■
10
│
GB
│
IE
2) After preheating, set the heat level control
6
for the desired use:
–
Choose a high or the highest setting for cooking thin grill food or for
searing meat . Grill it for a few minutes at maximum temperature on
both sides and then adjust the heat to a lower setting to ensure gentle
cooking .
–
Choose a medium or low setting for gentle further cooking of the food,
for slow cooking of delicate foods such as vegetables or fish or for
keeping ready-grilled food warm .
NOTE
►
The operating light
7
goes out as soon as the selected temperature
has been reached .
►
The operating light
7
may come on and go out several times during
this process . This is not a malfunction of the appliance! It merely indi-
cates that the appliance is maintaining the set temperature .
3) Tip:
Oil the cooking grill
1
with a little vegetable oil so that the food does
not stick to the cooking grill
1
.
4) Place the food directly on the cooking grill
1
and turn it over occasionally .
5) Turn the heat level control
6
to
0
and remove the plug from the power
socket .
6) Allow the appliance to cool down, remove the cooking grill
1
and the heat-
ing element
2
and carefully pour out the water from the drip tray
3
.
7) Clean all accessories as described in the section
Cleaning
.
Summary of Contents for 359393 2007
Page 3: ...0 MAX A ...
