13
GB/CY
thoroughly in clean water, then
dry.
Wipe the appliance and the at-
tachment parts with a moist cloth.
Use a little mild soapy water if
needed. Then dry off everything
thoroughly.
Replace the blade
13
after clean-
ing. Then turn the blade lock
12
anti-clockwise (in the direction
of the arrow) to reattach it.
Carrying out a full
cleaning
CAUTION!
Risk of injury from sharp
blade
13
! Do not move the position-
ing plate
10
near to the blade
13
during assembly, disassembly or
cleaning.
Proceed with cleaning as de-
scribed in the chapter “Cleaning
after each use“.
Turn the turning handle
11
past
the “0“ setting to ● and remove
the positioning plate
10
.
Wipe the positioning plate
10
with a moist cloth and then dry
it thoroughly.
Move the turning handle
11
into
position ►. Then replace the po-
sitioning plate
10
by pressing it
in the middle and then turn the
turning handle back to “0“.
To check that it is positioned
correctly, adjust the cutting width
as described in the chapter “Ini-
tial use“. If this does not work,
remove the positioning plate
10
again and repeat the process.
Storage
Be aware that the turning handle
11
must be set to “0“ during
storage.
Wrap the mains cable
15
around
the cable winder
14
and attach
the plug (see fig. C).
Only store the appliance when
it is folded together (see fig. A).
Store the appliance out of reach
of children. There is a risk of in-
jury from the sharp blade
13
.
Disposal
The packaging is made entirely of
recyclable materials, which you
may dispose of at local recycling
facilities.
Summary of Contents for 360719 2007
Page 3: ...A B C 1 13 12 10 2 3 4 6 5 5 7 8 11 4 7 6 9 11 14 15 ...
Page 4: ......
Page 16: ...16 ...
