9
GB
Do not use the product on swol-
len, burnt, inflamed, diseased or
injured regions of the skin and
body areas. If in doubt, obtain
medical advice before using the
product.
Never use the product if you
have injuries or pain in the neck,
shoulders, back, abdomen, thighs
or lower legs.
No action is needed from users
to shift the product between 50 Hz
and 60 Hz. The product adapts
itself for both 50 Hz and 60 Hz.
Before use
Note:
Remove all packaging material from the
product.
Connect the connection plug at the wire of the
mains power adaptor to the socket
3
at the
inner side of the hand loops
8
.
Place the massager around your neck, shoulders,
back, abdomen, thighs or lower legs. Align the
massage heads
2
on the side of your neck,
shoulders, back, abdomen, thighs or lower legs
use the hand loops
8
to adjust it. The control
buttons must be on the left.
Plug the mains power adaptor to the mains
power socket.
Ensure the massager heads
2
aligned to your
neck, shoulders, back, abdomen, thighs or
lower legs.
Operation
To switch on the massager, press the power
button
6
to start rotation of massage heads
2
in low speed.
To change the rotation speed of the massage
heads
2
, use the massage button
7
to tog-
gle between low speed rotation / high speed
rotation / pause. To stop the massage function,
press the power button
6
.
Note:
Never use the product for more than
15 minutes. A longer massage may lead to
tension caused by overstimulation of the muscles.
Note:
If you found yourself painful or uncom-
fortable, stop the massage immediately.
Warming function
To complement the massage with the warming
function, press the light and heat functions
button
5
to turn on the heat function. The red
heat function indicator
4
and the red light of
the massage heads
2
switch on.
Switch off the product
To switch off the product, press the power
button
6
, the heat function indicator
4
and
the light of the message heads
2
will go off,
the massage heads
2
stop rotating. The
product switches off automatically after 15
minutes.
To turn off the product completely, disconnect
the mains power adaptor from the power supply.
Cleaning and care
DANGER TO
LIFE BY ELECTRIC SHOCK!
Disconnect the mains power adaptor
from the mains socket and unplug connection
plug from the socket
3
before cleaning.
Never immerse the product,
or mains power adaptor into water.
Ensure the product is completely dry before
connecting the mains power adaptor.
Do not use abrasive, aggressive or chemical
cleaning agents to clean the product. It could
damage the product.
