SMGB A1
■
12
│
GB
│
IE
Switching the appliance on/off and selecting intensity
1) Switch the appliance on by moving the main switch
6
on the underside of
the handle
4
to the ON position.
9
The ring display
5
lights up green.
2)
Press the button
3
to start the appliance.
9
The display
2
shows the intensity level
.
The appliance starts on intensity level
.
3) To increase the intensity level, press the button
3
briefly.
9
Each press increases the intensity by one level. This is shown on the display
2
.
NOTE
►
After
reaching the highest intensity level
, if you press the button
3
again, the appliance stops working and switches into standby mode.
4) Massage the desired body part by gently moving the attachment back and
forth over the muscle area.
NOTE
►
Do not apply too much pressure, otherwise the appliance will automatically
switch off to protect the motor from a possible overload. If this safety device
has been triggered,
(
will appear on the display
2
.
You need to restart the appliance.
5) After you have finished using the appliance, switch it off by pressing and
holding the button
3
for around 2 seconds and then move the main
switch
6
to the OFF position.
NOTE
►
The appliance is equipped with an automatic switch-off to prevent over-
heating. The appliance switches off automatically after 15 minutes of
continuous operation. Allow the appliance to cool down for at least
15 minutes before using it again.
Summary of Contents for 391896-2201
Page 3: ...A B ON OFF ...
Page 65: ...SMGB A1 62 FR BE ...
Page 85: ...SMGB A1 82 NL BE ...
Page 239: ...SMGB A1 236 SI ...
