Silvercrest 66900, Operating Instructions Manual

6

Initial use

SWW 1500 A1

GB

IE

Initial use

Package contents and transport inspection

The device is delivered with the following components as standard:

Thermal wave heater

▯

Remote control

▯

2 Batteries type AAA/Micro

▯

2 Pedestals with securing screws

▯

4 Wall brackets (U shaped)

▯

1 Angle bracket (Z shaped)

▯

5 Rawlplugs S8

▯

5 Screws M4 x 42 mm

▯

7 Screws M4 x 13 mm 

▯

This operating manual

▯

NOTICE

Check the contents to ensure that everything is present and for signs of visible 

►

damage.
If the contents are not complete or are damaged due to defective packaging 

►

or through transportation contact the service hotline (see service).

Disposal of the packaging

The packaging protects the device from transport damage. The packaging materials 
are selected from the point of view of their environmental friendliness and disposal 
technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material 
and reduces generated waste. Dispose of packaging material that is no longer 
needed according to the regionally established regulations.

NOTICE

If possible preserve the device's original packaging during the warranty 

►

period so that in the case of a warranty claim you can package the device 
properly for return.