Silvercrest 66900, Operating Instructions Manual

7

Initial use

SWW 1500 A1

GB

IE

Requirements for the set-up location 

For safe and faultless operation of the device the set-up location must satisfy the 
following criteria:

The device must only be operated in an upright position and completely assembled.

■

When using the pedestals the device must be placed on a fi rm, fl at and even fl oor.

■

When wall mounting the device must only be mounted in a fi xed position on a 

■

verticle wall. 

The minimum distances of the housing from other objects must be maintained, they 

■

are; 100 mm at the sides, 300 mm above, 150 mm below (with wall mounting) 
and 500 mm in front.

Do not stand and/or hang the device in a hot, wet or very moist environment or 

■

in the vicinity of fl ammable materials.

The mains wall socket must be easily accessible so that the mains power cord 

■

can be easily removed in an emergency.

Environment temperature range: +5 to +45 °C

■

Humidity (no condensation): 5 - 90 %

■

DANGER

Fire hazard through contact with materials!

The risk of fi re exists if the heating elements come into contact 
with fl ammable materials!

Do not place and/or hang the device in the vicinity of curtains and other 

►

fl ammable materials.
Do not allow fl ammable materials (i.e. draperies) to come into contact with 

►

the device.
Do not cover the device.

►

Before initial use 

Remove all packaging materials and all transport securing devices from the device.

■

NOTICE

With initial use, for a brief period, a light odour accumulation can occur. 

►

This is normal and completely harmless.