- 5 -
Risk of personal injury!
Never attempt to remove food from the bowl
6
when the blade
7
is still in motion. Contents could
shoot out and make a mess.
³
Wait until the blade
7
has stopped rotating.
³
Lift the motor block
2
from the lid collar
3
.
³
Remove the lid
4
.
Risk of personal injury!
To avoid injuries, exercise caution when handling
the extremely sharp blade
7
. Keep the blade
7
out of the reach of children.
³
Carefully pull the blade holder
5
with the knife
7
out of the bowl
6
.
³
Remove the contents.
Note:
Due to the grinding of hard and abrasive foodstuffs,
the bowl
6
can take on a dull appearance over
time. This is normal and does not influence the func-
tioning of the appliance.
Note:
After you have finished processing the foodstuffs,
you can use the appliance base
o
as a cover for
the bowl
y
, this will help to keep the foodstuff fresh
for longer.
³
Remove the motor block
2
and the lid
4
from
the bowl
y
.
The blade retainer
5
with the blade
7
can, if
you wish, remain in the bowl
y
.
³
Loosen the appliance base
o
from the undersi-
de of the bowl
y
. You can now place applian-
ce base
o
on the bowl
y
so that it seals the
bowl
y
.
Beating cream
Using the whisk attachment
0
, you can also whip
cream with this appliance:
³
Place the bowl
6
in the appliance base
9
.
³
Place the blade holder
5
with the knife
7
on
the mounting
8
.
³
Push the whisk attachment
0
onto the blade hol-
der
5
:
For 100 ml of cream, place it on the blade hol-
der so that the whisk attachment
0
rests on the
two blades and engages.
For 200 ml of cream, turn the whisk attachment
0
vertically through 180°, so that it rests on
only one blade and engages. It then ploughs
higher through the cream:
³
Pour the cream in.
³
Close the bowl
6
with the lid
4
: Place it on the
bowl
6
so that the lugs on the lid
4
engage in
the slots on the bowl
6
. Then turn the lid
4
so
that the lugs slide unter the slots and the lid
4
locks into place.
³
Place the motor block
2
on the lid collar
3
.
³
Press the motor block
2
downwards , as shown
in Figure B. The motor starts with the normal ope-
rating speed.
IB_68666_SMZ260C2_LB3 29.09.2011 11:18 Uhr Seite 5