49
SHS 220 A1
GB
MT
Setting up and connecting to the mains
power supply
Unpacking
♦
Remove all appliance parts and the operating instructions from the carton.
♦
Remove all packing material.
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves raw materials and
reduces the volume of generated waste. Dispose of packaging material that is
no longer needed according to the regionally established regulations.
NOTICE
►
If possible preserve the appliance's original packaging during the warranty
period so that, in the case of a warranty claim, you can package the ap-
pliance properly for return.
Set-up location requirements
For the safe and fault free operation of the appliance, the installation location
must fulfi ll the following conditions:
■
Place the appliance on a fi rm, fl at and level surface.
■
Do not operate the appliance in a hot, wet or very humid location or in the
vicinity of fl ammable materials.
■
The surfaces of furniture may contain components that could aff ect and
soften the rubber pads on the appliance. If necessary, place an anti-slip mat
under the rubber pads of the appliance.
■
The mains power socket must be easily accessible so that, in an emergency,
the plug can be quickly disconnected.
IB_75952_SHS220A1_LB5.indb Abs2:49
IB_75952_SHS220A1_LB5.indb Abs2:49
19.06.12 08:46
19.06.12 08:46
