10
SWCD 1000 A1
GB
Removing attachments
■
First switch the appliance off and allow it to cool down..
■
Press the release button “push”
7
and turn the attachment anti-clockwise
.
■
The attachment can now be removed by pulling it out of the attachment inser-
tion slot
1
.
Switching on /off / Selecting a heat level
■
When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch
3
and select the output level:
–
“0“ The appliance is switched off
–
“1“ for a reduced air-fl ow strength with heat
–
“2“ for a high air-fl ow strength with heat
■
You switch the appliance off by sliding the level switch
3
to the position “0”
(= appliance off ).
■
To fi x the styling, you can use the slide switch Cool Shot
2
. The styling will
be fi xed by the cool air stream:
–
During operation, slide the slide switch Cool Shot
2
upwards.
The air fl ow will be cooler.
–
When you want to deactivate the cool air stream, slide the slide switch
Cool Shot
2
downwards.
Using the attachments
Large round brush
11
This attachment gives the hair more volume or large curls.
■
Wind a slightly damp strand of hair around the large round brush
q
.
■
Switch the appliance on at level 1 or 2.
■
When the strand is dry, slide the slide switch Cool Shot
2
upwards.
Wait until the strand has cooled.
■
Unwind the large round brush
q
from the strand.
■
Proceed with the other strands in the same way.
IB_87966_SWCD1000A1_PL_SI_CZ.indb 10
IB_87966_SWCD1000A1_PL_SI_CZ.indb 10
08.03.13 09:17
08.03.13 09:17
