13
SDBS 2200 A1
GB
IE
Ironing without steam
NOTE
Always set the temperature control
and the steam control
to the lowest
level before you switch on the appliance. The symbols on the temperature
control
correspond to the following settings:
●
Synthetics
–
lowest temperature (70
–
120°C)
● ●
Wool, silk
–
medium temperature (100
–
160°C)
● ● ●
Cotton, linen
–
highest temperature (140
–
210°C)
♦
Press the on/off button
to switch on the appliance. The indicator in the
button as well as the “Iron dry” indicator
light up.
NOTE
If the "Iron dry" indicator
does not light up, the boiler button
is pressed.
Press this button to switch off the boiler function.
♦
Turn the temperature control
to set the desired ironing temperature.
♦
The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator
goes out, the set temperature has
been reached and you can start ironing.
♦
If the iron
is fi xed to the base station
using the catch
, push the
catch release
into the
position. Now you can remove the iron
from the base station
.
♦
After ironing, place the iron
on the base station stand
.
Set the temperature control
to “MIN”.
♦
Press the on/off button
to switch off the appliance. The indicator in the
On/off button
and the “Iron dry” indicator
go out. To avoid tripping
hazards, place the connecting hose
in the holder
provided, pull the
mains plug out of the socket and press the cable retractor button
.
♦
To fi x the iron
back onto the base station
push the catch release
into the position. Then you can carry the appliance in just one hand using
the iron handle
if you have previously placed the connecting hose
in
the holder
provided (to avoid a tripping hazard).
Summary of Contents for 96145
Page 3: ...A B ...
