11
ADR 1300 B3
GB
IE
CY
Storage
1) Store the cleaned and dryed appliance at a clean and dust-free location.
2) Wrap the power cable around the attached water tank and secure the end
with the yellow clip on the power cable.
Troubleshooting
PROBLEM
POSSIBLE
CAUSE
POSSIBLE
SOLUTIONS
The appliance does
not function.
The plug is not con-
nected to the mains
power supply.
Connect the appliance
to a mains power socket.
The appliance is dam-
aged.
In this case, contact
Customer Services.
It will not produce
steam.
The switch "Anti-calc
Function"
4
is at the
position "I".
Place the switch "Anti-calc
Function"
4
at the posi-
tion "O".
The water tank
3
is
empty.
Fill the water tank
3
with water.
The appliance is not yet
heated up.
Wait until the green
control lamp
7
glows.
The green control
lamp
7
lights up and
then goes out again.
There is no defect: the
temperature fell briefl y
and the appliance was
then heated up again.
-
The steam volume is
low.
The temperature is too
low.
Wait until the appliance
has heated up again.
The appliance is scaled
up.
Descale the appliance (see
chapter "Scale removal").
Water drips from the
steam nozzle
0
.
The switch "Anti-calc
Function"
4
is at the
position "I".
Place the switch "Anti-calc
Function"
4
at the posi-
tion "O".
The temperature is too
low.
Wait until the appliance
has heated up again.
Disposal of the appliance
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your
community waste facility. Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Summary of Contents for ADR 1300 B3
Page 3: ...B q A 4 1 2 6 7 5 3 8 9 0 ...
Page 53: ...50 ADR 1300 B3 ...
Page 67: ...64 ADR 1300 B3 ...