10 GB
Select the unit of weight by pressing the unit of
weight button
6
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
Note:
If the kitchen scale
2
is overloaded, the
LCD readout
5
indicates “Err” and it will switch
off within 3 seconds. Remove food from the kitchen
scale then press the ON/OFF button
3
to switch
on the kitchen scale again.
Q
Weigh and add
The kitchen scale
2
allows you to weigh foods
consecutively without removing food already in the
weighing bowl
1
.
Place the weighing bowl
1
on the kitchen
scale
2
.
Press the ON / OFF button
3
to switch the
kitchen scale
2
on.
Select the unit of weight by pressing the unit of
weight button
6
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
7
. The kitchen
scale
2
now reads “TARE“.
Now place more food in the weighing bowl
1
.
The LCD readout
5
indicates the weight of the
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the kitchen scale
2
is reached or
the weighing bowl
1
is full.
Q
Remove part of the
weighed food
Place the weighing bowl
1
on the kitchen
scale
2
.
Press the ON / OFF button
3
to switch the
kitchen scale
2
on.
Select the unit of weight by pressing the unit of
weight button
6
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
7
.
Now remove the required amount of food from
the weighing bowl
1
.
The LCD readout
5
indicates the weight of the
food you have removed as a negative number.
Now press the Zero button
7
. The kitchen
scale
2
now reads 0 g / 0.0 oz and “TARE”
for further removal / adding food.
Q
Set the countdown timer / alarm
The timer on the kitchen scale has a time span of
00:10 to 99:50 minutes. The set time is counted
down in reverse to “00:00“. An alarm signal then
sounds and the alarm display “ “
15
flashes.
Press the ON / OFF button
3
to switch the
kitchen scale
2
on.
Press the Timer button
4
.
Set the required time by pressing the Timer button
“ “
6
, or the Timer button “ “
7
.
Press the Timer button
4
again to confirm the
set time and to start the countdown timer.
Press the Timer button
4
again to stop the
countdown timer.
Press the Timer button
4
again to reset the set
time to “00:00“.
NOTE:
When the set time has elapsed, an alarm
signal sounds.
Press the ON / OFF button
3
to stop the alarm and
at the same time switch off the kitchen scale
2
.
