18 GB/IE
Operation
Set the product on a solid, level and flat surface
to weigh.
Weighing
Note:
Always place the object you wish to weigh
gently onto the weighing surface
1
to avoid damag-
ing the glass surface.
Briefly touch the button / TARE
3
to switch on
the product. The LC display
2
will show all dis-
plays for approx. 2 seconds.
Note:
A slight touch of the button / TARE
3
and the button UNIT
4
is sufficient to operate the
product. If there is too much pressure, the
product may cause tilting.
During this time the weighing equipment on the
product is adjusting. Afterwards the numerical
display
7
will read “
0
“. The unit display
8
will
show the last unit selected.
Note:
if an object (e.g. a key) is already on the
weighing surface
1
while switching on, the
numerical display
7
will still read “
0
“.
Place the item you wish to weigh onto the product.
The numerical display
7
will show the weight of
the item you are weighing.
Incremental weighing
Touching the button / TARE
3
with the product
on will change the numerical display
7
from the
reading to “
0
“. The “TARE“ symbol
10
will appear.
Now add another item to weigh onto the product.
The numerical display
7
will show the weight of
the newly added item.
If you remove the item added to the product, the
numerical display
7
will again read “
0
“.
If you remove all items from the product, the LC
display
2
will show a negative value indicated
by the minus symbol
9
.
Then briefly touch the button / TARE
3
, and the
“TARE“ symbol
10
will disappear.
Important!
Be sure never to add more than 5 kg
to the weighing surface
1
. Overloading the
product can damage it.
Changing the measuring unit
The product will display the weight in the official Euro-
pean measuring unit “g“ (grams), as well as the tradi-
tional unit of weight “oz“ (ounce, 1 oz ≈ 28.35 g) or
“lb’oz“ (pound: ounce, 1lb = 16 oz ≈ 453.59 g).
When measuring the volume of water, the product
calculates it by the weight using the official European
unit of volume “ml“ (millilitres) or the traditional unit of
measure fl’oz (fluid ounces, 1fl’oz ≈ 28.41 ml).
To switch the unit of measure, briefly touch the UNIT
button
4
. After each time it is touched, the unit
display
8
will switch to the next unit listed:
g → oz → lb’oz → ml → fl’oz
Switching off
Holding the button / TARE
3
for approx. 1–2
seconds will off the product. If no movement is de-
tected on the weighing surface
1
for 2 minute and
no button is pressed, the product will automatically
switch off.
Troubleshooting
= Fault
= Cause
= Solution
