Silvercrest IAN 276299, Operation And Safety Notes

10  GB/IE/NI

Setting-up operation

Q     

Using the remote- 

control (fig. A)

The remote control will control up to 4 
remote-controlled sockets (individually, 
in groups or simultaneously).
 1.  Press the desired ON button of the 

channel ON/ OFF button 

2

 (A, B, 

C or D) on the remote control of 
the device you wish to switch on. 
The LED status light 

5

 and the op-

erating control lamp 

1

 will light up.

 2.  Press the desired OFF button of the 

channel  ON / OFF  button 

2

 (A, 

B, C or D) on the remote control for 
the device you wish to switch off. 
The LED operating status display 

5

will go out.

 3.  Confirm the ALL ON / OFF button 

3

 to switch all remote-controlled 

sockets simultaneously.

Q    

Trouble-shooting

If the remote control does not 
work, please check the follow-
ing points:

Prob-
lem

The operating indica-
tor 

1

 on the remote 

control device illumi-
nates but there is no 
reaction

Rem-
edy

·   Check if the battery still 

has sufficient Ampere. If 

necessary, install a new 

battery.

Prob-
lem

No indicator light 

1

on remote control 
when pressing “ON” 
or “OFF”

Rem-
edy

·   Check if the battery is  

inserted correctly. 

·   Check if the battery has 

good contact, if neces-

sary press down.

Prob-
lem

No reaction from  
consumer

Rem-
edy

·   Check that the appliance 

is switched on.

·   Assign a new code to the 

wireless socket (see  

“Setting up the wireless 

socket”).

·   Check - by walking closer 

to it - that the range is 
correct for the desired  
location.