- 4 -
Operation
Note
Before using the appliance for the first time, clean it
thoroughly as per the instructions given in the chapter
"Cleaning".
➩
Place the bowl
6
in the appliance base
9
.
➩
Place the blade holder
5
with the knife
7
on
the mounting
8
.
➩
Prepare the items to be processed by cutting lar-
ge pieces to a size that will fit in the bowl
6
.
➩
Place the food to be processed in the bowl
6
.
Thereby, take note of the following table:
Foodstuff
Filling
quantity
Processing
time
SPEED
Salami
130 g
2 x 5 secs.
Normal
Cheese
(Gouda,
young,
refrigerator
temperature)
120 g
2 x 8 secs.
Turbo
Onions
Garlic
100 g
pulsating
Turbo
Carrots
100 g
3 x 5 secs.
Normal
Dried fruit
130 g
2 x 8 secs.
Normal
Almonds
150 g
coarse:
1 x 10 secs.
middle:
2 x 10 secs.
fine:
3 x 10 secs.
Turbo
Eggs
(hard boiled)
150 g
2 x 4 secs.
Turbo
Walnuts
100 g
2 x 8 secs.
Turbo
Ice cubes
100 g
pulsating
Turbo
➩
Close the bowl
6
with the lid
4
: Place it on the
bowl
6
so that the lugs on the lid
4
engage in
the slots on the bowl
6
. Then turn the lid
4
so
that the lugs slide unter the slots and the lid
4
locks into place.
➩
Place the motor block
2
on the lid collar
3
.
➩
Press the motor block
2
downwards, as shown
in Figure B. The motor starts with the normal
operating speed.
➩
To make use of the higher processing speed
"Turbo", press, in addition to the motor block
2
,
the turbo button
1
and keep it pressed down,
as shown in Figure C.
Note
Should larger pieces of the contents collect on the
wall of the bowl while processing, lift the motor
block
2
from the lid collar
3
. Shake the bowl
6
vigorously and then continue with the processing.
Remove possible residues with a dough scraper.
With particularly hard foodstuffs, for example block
chocolate, the selection of a pulsatory processing is
recommended. For this, press the turbo button
1
repeatedly for a short time (in addition to the motor
block
2
). Should the foodstuff not be completely
pulverised, you can either cut it into smaller pieces
or lift the motor block
2
from the lid collar
3
.
Shake the bowl
6
vigorously and then continue
with the processing.
➩
When the contents have been sufficiently chopped,
release the motor block
2
and, if necessary, the
turbo button
1
.
➩
Unplug the power cable from the socket.
IB_KH1161_RP32525_LB3 26.02.2009 10:08 Uhr Seite 4