Silvercrest KH 2155, Operating Manual

- 17 -

Clear programmed button

1.  Press the corresponding device button.

2.

Hold down the SET button 

e

 for a little longer than  

3 seconds.

3.  With the 



 or 



 button 

h

 select "LEARNING" and con-

firm with the OK button 

l

. In the LCD display 

q

appears "LEARN KEY".

4.  With the 



 or 



 button 

h

 select "DELETE KEY" and con-

firm with the OK button 

l

. In the LCD display 

q

appears "SELECT KEY".

5.

Press the taught button that is to be deleted. In the LCD 

display 

q

 appears "SURE DELET" (are you sure?).

6.

Confirm the delete process with the OK button 

l

. In  

the LCD display 

q

 appears "DELETED" and then again 

"SELECT KEY".

7.  Repeat steps 5-6 to delete further buttons.

8.

Press any device button 

r

 to end the mode.

Delete all of a device's programmed buttons

1.

Hold down the SET button 

e

 for a little longer than  

3 seconds.

2.  With the 



 or 



 button 

h

 select "LEARNING" and con-

firm with the OK button 

l

. In the LCD display 

q

appears "LEARN KEY".

3.  With the 



 or 



 button 

h

 select "DELETE DEV" (delete 

device) and confirm with the OK button 

l

. In the LCD 

display 

q

 appears "SELECT DEV" (select device).

4.

Select the device button 

r

 for the device whose taught 

button command you want to delete.

5.

In the LCD display 

q

 appears "SURE DELET". Confirm 

with the OK button 

l

. In the LCD display 

q

 appears 

"DELETED" and then "SELECT DEV".

6.  Repeat steps 4-5 if you also want to delete taught button 

commands of other devices.

7.

The EXIT button 

j

 returns you to the previous status.

  Note:

The delete process can take several minutes depending on 

the number of taught commands.

Delete All programmed buttons

1.

Hold down the SET button 

e

 for a little longer than  

3 seconds.

2.  With the 



 or 



 button 

h

 select "LEARNING" and con-

firm with the OK button 

l

. In the LCD display 

q

appears "LEARN KEY".

3.  With the 



 or 



 button 

h

 select "DELETE ALL" and con-

firm with the OK button 

l

.

4.

In the LCD display 

q

 appears "SURE DELET". Confirm 

with the OK button 

l

. In the LCD display 

q

 appears 

"DELETED" and then again "DELETE ALL".

5.  With the EXIT button 

j

 you return to the previous status.