Silvercrest KH 2155, Operating Manual

- 19 -

  Tips:

1.  A maximum of 16 button commands can be saved in a 

Macro. After entering the 16 button commands the Macro 

is automatically saved and in the LCD display appears 

"SUCCESS".

2.

To exit the mode without saving press the EXIT button 

j

.

3.  You can not save any Macros on a slot that is already 

occupied. If you want to programme a new Macro you 

must first delete the old Macro.

4.

In the "SELECT KEY" mode you can only return to the 

previous status with the EXIT button 

j

.

Example

 You want to save a command chain in a Macro. 

We begin in the "SELECT KEY" mode.
Desired command chain: Switch on TV => switch to DVD  

=> switch on DVD and playback
In the SELECT KEY mode, for this you enter the following 

button commands: 

 => 

 =>   => 

 => 

=> 

Execute a Macro

To execute a preprogrammed Macro proceed as follows:
1.

Press the MACRO button 

2@

.

2.

With the corresponding number button 

o

 access the  

desired Macro (1-6). Example If Macro 3 is to be 

executed first press the Macro button 

2@

 and then the 

number button 

.

   Note:

If no Macro number button is pressed within 18 seconds  

or a Macro number button is pressed, for which no Macro 

has been programmed or another button is pressed then  

no Macro can be executed. In this case the background  

illumination blinks 4 times in rapid succession.

Macro deletion

To delete a preprogrammed Macro proceed as follows:
1.

Hold down the SET button 

e

 for a little longer than  

3 seconds.

2.  With the 



 or 



 button 

h

 select "MACRO" and confirm 

with the OK button 

l

.

3.  With the 



 or 



 button 

h

 select the desired Macro and 

confirm with the OK button 

l

. In the LCD display 

q

 ap-

pears "SET UP".

4.  With the 



 or 



 button 

h

 select "DELETE" and confirm 

with the OK button 

l

.

5.

In the LCD display 

q

 appears "SURE DELET" (are you 

sure?). Confirm the delete process with the OK button 

l

. 

In the LCD display 

q

 is shown the memory slot of the 

Macro that has just been deleted.

6.  With the 



 or 



 button 

h

 you can delete other Macros. 

Then continue with step 3.